Stamping after cutting
| Production name | Stamping after cutting |
|---|---|
| Description | Dull edges, fracture surfaces and burrs are unavoidable in blanking. The ratio of occurrence depends on the material, the blanking clearance, the blanking form, the blanking speed, processing oil, and other factors. Products used in electronic components are required to have no dull edges or burrs, but strictly speaking, this is almost impossible to achieve. However, it is possible to minimize the dull edges and burrs to a level at which they present no problem in actual use. |
| Material | Oxygen-free copper |
| Production photos |
  |
 |
|
