Precision Drawing
Xerom engages in manufacturing unique to integrated production. This encompasses side cutting, oblique drawing, and irregular shape drawing for all processes ranging from metal die production to mass production.
- Oblique drawing
- Irregular shape drawing
- Integrated system from metal dies to mass production
Side cutting with a progressive die
| Description | Traditionally, this process was performed with a transfer stamp. We introduced a special technique that paves the way for the use of a progressive die. This is a significant help ... |
|---|---|
 |
|
Irregular shape drawing
| Description | - The key points are the blank shape and the punch form produced by single-action drawing. - The drawing rate differs between the Y and X planes. This form is prone to scrapes, wrinkling ... |
|---|---|
|
|
Ultra-precision drawing
| Description | This product is unique in that another copper product exists press-attached to the inner bore of the product by two-step drawing. The most significant point of this is how well they ... |
|---|---|
| Material | Oxygen-free copper |
| Thickness | 0.12mm |
|
|
Ultra-precision drawing – A final draw punch diameter of φ 0.25 mm
| Description | This product is characterized by a hoop-shaped drawn product that is very thin and long with a small diameter. This drawn shape is reached after performing 18 processes. The final draw ... |
|---|---|
| Material | Nickel silver |
| Thickness | 0.15mm |
|
|
Ultra-precision drawing – Roundness with an internal diameter of 0.36 ± 0.01 mm
| Description | The point of this product is that roundness with an internal diameter of 0.36 ± 0.01 mm is required while ensuring a product height of 0.43 mm, or at least 4.0 mm, from phosphor bronze ... |
|---|---|
| Material | Phosphor bronze |
| Thickness | 0.08mm |
|
|
Ultra-precision drawing – NM-AK steel
| Description | The distinctive features of this product are that the material, NM-AK, is very difficult to draw and that no burrs, scrapes or foreign particles are permitted since this special product ... |
|---|---|
| Material | NM-AK |
| Thickness | 0.15mm |
|
|
Fine Drawing – 1.35mm x 1.80mm x 0.85mm
| Description | This product has a very small shape formed by rectangular drawing. The difficulty in rectangular drawing is that cracks are likely to occur if the same clearance settings apply to ... |
|---|---|
| Material | Nickel silver |
| Thickness | 0.08mm |
|
|
